Jasco 45146 Manual de instrucciones descargar pdf (Pagina 8)

Step 2. Enter a number (1, 2, or 3) for the User code

you would like to change (1=Master code, 2= User 2

code, 3 = User 3 code).

Step 3. Press and release the Green button.

Step 4. Enter the new 4-digit code. Press and release

the Green button.

Step 5. Re-enter new 4-digit code again. Press and

release the Green button.

The LED will ﬂash 5 times and turn off indicating the

code for that User code has been stored/changed.

Example: To set User 2 code to 2222

Press and release the Green button

(The LED will turn on)

Enter 1,2,3,4 (Wireless keypad is now in Program Mode)

Press and release the green button

Enter 2

Press and release the green button

Enter 2,2,2,2

Press and release the green button

Re-enter 2,2,2,2

Press and release the green button (red LED will ﬂash 5

times and turn off)

In this example, User 2 code has been set as 2222.

Erasing Alternate User Codes

Alternate user codes can be removed completely from

the memory if necessary. Note: the Master Code (1)

cannot be erased, only changed.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 18 19

Sin comentarios

Jasco 45146 Manual de instrucciones Pagina 8