Jasco 45145 Manual de instrucciones descargar pdf (Pagina 8)

Mounting the Panic Button onto a Wall

(using screws/wall anchors)

– you will need drill, 3/16” or 1/8” drill bit and a ﬂat

blade-type screwdriver.

1. Remove the top cover from the mounting plate. (See

Removing the Top Cover from the Mounting Plate.)

Set the top cover aside.

2. Select a suitable location that provides protected,

easy access. Be sure to test the device before

mounting. Use the bottom mounting plate as a

template. Mark the two holes on the wall for the

anchors and/or screws as shown. Please be sure to

mark the center of the holes.

3(a). If mounting into drywall, use the plastic anchors.

Using a 3/16” drill bit, drill holes and insert anchors for

a snug ﬁt. Align mounting plate holes to anchor holes,

insert screws and screw in until plate has secure ﬁt.

Do not over-tighten screws.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Sin comentarios

Jasco 45145 Manual de instrucciones Pagina 8